24V LED Modules

When you are tackling large-scale projects—such as illuminating an expansive rooftop logo or running extended light lines—twelve volts can easily push against voltage drop limits. This is precisely where 24V LED modules step in. Engineered for endurance, they effortlessly manage long wiring runs without noticeable brightness decay or fading toward the end of the chain. If you are building larger architectural signage and relying on professional LED technology, these workhorses will not let you down.

Product sorting

7 items total

List of products

Obrázek
€255,07 excl. VAT
€308,63 / pcs

LED Flex Sheet designed for uniform backlighting of large areas and interior illuminated advertisements with a depth of 20–50 mm. The basis is LED strips stacked next to each...

Code: 582201
Obrázek
€214,27 excl. VAT
€259,27 / pcs

LED Flex Sheet designed for uniform backlighting of large areas and interior illuminated advertisements with a depth of 20–50 mm. The basis is LED strips stacked next to each...

Code: 582202
Obrázek 1
New
€443,74 excl. VAT
€536,93 / pcs

LED Flex Sheet designed for homogeneous illumination of stretch ceilings and light boxes without visible spots. The basis is a soft flexible membrane (width 240 mm) equipped...

Code: 582211
Obrázek 1 (1)
New
€1,40 excl. VAT
€1,69 / pcs

The new LED module technology delivers high efficiency and thanks to the special design of the microlenses, the light is evenly distributed over the entire application area. The...

Code: 541324
Obrázek 1
New
€0,57 excl. VAT
€0,69 / pcs

The new LED module technology delivers high efficiency and thanks to the special design of the microlenses, the light is evenly distributed over the entire application area. The...

Code: 541321
Obrázek 1
New
€0,81 excl. VAT
€0,98 / pcs

The new LED module technology delivers high efficiency and thanks to the special design of the microlenses, the light is evenly distributed over the entire application area. The...

Code: 541322
Obrázek 1
New
€0,89 excl. VAT
€1,08 / pcs

The new LED module technology delivers high efficiency and thanks to the special design of the microlenses, the light is evenly distributed over the entire application area. The...

Code: 541323

Listing controls

7 items total

FAQ – Frequently Asked Questions

Why choose 24V modules instead of traditional 12V ones?
The main reason is voltage drop. With a 24V system, you can wire a much longer chain of modules in a single line without the last ones shining dimmer. For large illuminated signs, this means less cable pulling and fewer power connection points, saving you a lot of time and money during installation.

How many modules can I wire in series on a single power feed?
With the 24V variant, you typically achieve double the lengths compared to a 12V system. While with a 12-volt setup you should handle power feeds every few meters, here you can run longer strings (depending on the specific module's wattage). The result is uniform light without needing a "spiderweb" of wires inside the box.

Do I need a special transformer for 24V modules?
Yes, you will need a stabilized power supply rated directly for 24V DC. Be careful not to confuse them with 12V power supplies – if you swap them, the modules will either not light up at all or, conversely, burn out immediately. The 20% power reserve rule applies here as well, ensuring the transformer doesn't struggle unnecessarily and lasts a long time.

Are these modules also suitable for outdoor use?
Most of our 24V modules feature a high ingress protection rating (often IP67), making them perfectly protected against dust and water. These materials are built for harsh outdoor conditions and are unaffected by rain, snow, or direct sunlight. You just need to mount them correctly and ensure that the cable connections are kept dry or properly insulated.