LED Al Profiles

Aluminum profiles for LED strips are not merely an aesthetic enhancement—they are essentially "bodyguards" and heat sinks rolled into one. If you want your lighting to look professional, eliminate glare, and above all, operate reliably for years to come, a quality aluminum channel is indispensable. In our LED technology range, you will find profiles tailored for corners, drywall, and furniture installations.

Product sorting

24 items total

List of products

Obrázek 1
€2,80 excl. VAT
€3,39 / m

Aluminum profile suitable as a carrier for powerful LED strips and LED modules. It serves as a heat sink up to 30W. The profile is produced in 6-meter rods of anodized aluminum....

Code: 73590
Obrázek 1
€6,10 excl. VAT
€7,38 / m

AL PROFILE FOR LED 90/60° CORNER 4M

Code: 3209014120
Obrázek 1
€4,26 excl. VAT
€5,16 / m

Aluminium profile W11 elox 4m

Code: 3209013120
Obrázek 1
€5,06 excl. VAT
€6,12 / m

ALU profile 18x18 CORNER 12 - anodized - finds application when lighting furniture, stairs, display cases, bars, hotels, work stations, etc.

Code: 7312031818
Obrázek 1
€1 excl. VAT
€1,21 / m

Anodized aluminum profile 15 x 9 mm / up to 6 m long / designed to be milled into furniture.

Code: 73010
Obrázek (1)
€4,27 excl. VAT
€5,17 / m
Code: 7312021714
Obrázek 1
€5,01 excl. VAT
€6,06 / m
Code: 7320013010
Obrázek 1
€5,01 excl. VAT
€6,06 / m

ALU profile WIDE UP - anodized

Code: 7320022310
Obrázek 1
€3,61 excl. VAT
€4,37 / m

ALU profile 16x16 CORNER 16 - Anodized application finds when lighting furniture, stairs, display cases, bars, hotels, workstations, etc.

Code: 7310021616
Obrázek 1
€3,96 excl. VAT
€4,79 / m
Code: 73100216163
Obrázek 1
New
€5,09 excl. VAT
€6,16 / m
Code: 73017
Obrázek 1
€12,35 excl. VAT
€14,94 / m

Profile STOS-ALU is a low profile to be attached. If you do not want or can not make old furniture in older furniture, this profile is the best option. The profile is anodized...

Code: 73B4369

Listing controls

24 items total
Top

FAQ – Frequently Asked Questions

Why is an aluminum profile for LED strips so important?
The main task of aluminum is heat dissipation. LED chips heat up when lit, and if you were to stick the strip directly onto wood or plastic, it could "bake" – the chips would quickly lose brightness and the strip would soon stop working. The aluminum profile acts as a passive heatsink that effectively dissipates heat into the surroundings, significantly extending the lifespan of the entire installation.

What is the difference between surface-mounted, recessed, and corner profiles?

  • Surface-mounted (wall): Mounted directly onto the surface, they are the easiest to install (e.g., under a kitchen counter).
  • Recessed (grooved): Designed to be embedded into a pre-milled groove in furniture or drywall. They feature "wings" that cover the edge of the cut, resulting in a flush finish with the surface.
  • Corner: They shine at a 45° angle, which is ideal for illuminating a work surface from the corner between a cabinet and the wall.

What diffuser (cover) should I choose – clear or opal?
The diffuser protects the strip from dust and moisture, but also affects the appearance of the light. The clear diffuser transmits almost 100% of the light, but individual luminous points (diodes) are visible through it. The opal (milky) diffuser beautifully diffuses the light into a continuous line of light and does not glare, which looks much more luxurious, even though it reduces brightness intensity by approx. 20–30%.

Can I handle the assembly and cutting of profiles myself in the workshop?
Certainly, aluminum is a soft and malleable material. For cutting, a regular hacksaw or a miter saw with a suitable blade is enough. The profiles are then either glued into place or attached using special snap-on brackets (clips). Don't forget the end caps, which neatly close the strip at the edges and hide any cables.