LED Al Profiles

Aluminum profiles for LED strips are not merely an aesthetic enhancement—they are essentially "bodyguards" and heat sinks rolled into one. If you want your lighting to look professional, eliminate glare, and above all, operate reliably for years to come, a quality aluminum channel is indispensable. In our LED technology range, you will find profiles tailored for corners, drywall, and furniture installations.

Product sorting

24 items total

List of products

Obrázek 1
€2,80 excl. VAT
€3,39 / m

Aluminum profile suitable as a carrier for powerful LED strips and LED modules. It serves as a heat sink up to 30W. The profile is produced in 6-meter rods of anodized aluminum....

Code: 73590
Obrázek 1
€6,10 excl. VAT
€7,38 / m

AL PROFILE FOR LED 90/60° CORNER 4M

Code: 3209014120
Obrázek 1
€4,26 excl. VAT
€5,16 / m

Aluminium profile W11 elox 4m

Code: 3209013120
Obrázek 1
€5,06 excl. VAT
€6,12 / m

ALU profile 18x18 CORNER 12 - anodized - finds application when lighting furniture, stairs, display cases, bars, hotels, work stations, etc.

Code: 7312031818
Obrázek 1
€1 excl. VAT
€1,21 / m

Anodized aluminum profile 15 x 9 mm / up to 6 m long / designed to be milled into furniture.

Code: 73010
Obrázek (1)
€4,27 excl. VAT
€5,17 / m
Code: 7312021714
Obrázek 1
€5,01 excl. VAT
€6,06 / m
Code: 7320013010
Obrázek 1
€5,01 excl. VAT
€6,06 / m

ALU profile WIDE UP - anodized

Code: 7320022310
Obrázek 1
€3,61 excl. VAT
€4,37 / m

ALU profile 16x16 CORNER 16 - Anodized application finds when lighting furniture, stairs, display cases, bars, hotels, workstations, etc.

Code: 7310021616
Obrázek 1
€3,96 excl. VAT
€4,79 / m
Code: 73100216163
Obrázek 1
New
€5,09 excl. VAT
€6,16 / m
Code: 73017
Obrázek 1
€12,35 excl. VAT
€14,94 / m

Profile STOS-ALU is a low profile to be attached. If you do not want or can not make old furniture in older furniture, this profile is the best option. The profile is anodized...

Code: 73B4369

Listing controls

24 items total
Top

Profile for LED strips suitable for both home and professional installations. Profiles serve as a cooler for powerful LED strips and can be complemented by caps in various colors. On stock we have standard 6 m long rods.

We format and supply the required lengths according to the customer's wishes. For the profile, we recommend that you buy a cover plexiglass in color and translucency that will suit you. Please do not hesitate to contact us with a selection of suitable plexiglass.

If we collect less than 6 meters, we charge a 15% surcharge for the material being collected.

FAQ – Frequently Asked Questions

Why is an aluminum profile so important for LED strips?
The main task of aluminum is heat dissipation. LED chips heat up when illuminated, and if you were to stick the strip directly onto wood or plastic, it could "bake" – the chips would quickly lose luminosity and the strip would soon stop working. The aluminum profile acts as a passive heat sink that effectively transfers heat to the surroundings, significantly extending the lifespan of the entire installation.

What is the difference between surface-mounted, recessed, and corner profiles?

  • Surface-mounted (wall): Installed directly onto the surface, they are the easiest to install (e.g., under a kitchen cabinet).
  • Recessed (groove): Designed to be flush-mounted into a pre-milled groove in furniture or drywall. They feature "wings" that cover the cutting edge, resulting in a flush finish with the surface.
  • Corner: Shine at a 45° angle, which is ideal for illuminating a work surface from the corner between a cabinet and the wall.

Which diffuser (cover) should I choose – clear or opal?
The diffuser protects the strip from dust and moisture while also influencing the appearance of the light. A clear diffuser transmits nearly 100% of the light, but individual glowing points (diodes) are visible through it. An opal (milky) diffuser beautifully scatters the light into a continuous light line without glare, which looks much more luxurious, even though it reduces brightness intensity by about 20–30%.

Can I handle the installation and cutting of profiles myself in the workshop?
Definitely, aluminum is a soft and malleable material. An ordinary hacksaw or a miter saw with a suitable blade is all you need for cutting. The profiles are then either glued into place or secured using special snap-on mounting clips. Don't forget the end caps, which elegantly close off the ends of the rail and hide any potential cables.