12V LED Modules
12V LED modules are the gold standard found in nine out of ten illuminated signs. Operating on extra-low voltage, they are inherently safe, highly reliable, and compatible with power supplies available virtually everywhere. If you are building a lightbox or backlighting channel letters and counting on proven LED technology, a 12V setup is a foolproof choice.
Product sorting
List of products
The new LED module technology delivers high efficiency and thanks to the special design of the microlenses, the light is evenly distributed over the entire application area. The...
Voltage-powered Professional LED modules are designed for applications not only in light and 3D advertising. In line there are 12V DC and AC power supply modules. These are high-quality compact modules developed based on years of experience with regard to customer needs. DX line LED modules are suitable for professional and demanding applications with high light intensity.
Lifetime reaches up to 50.000 hours with a luminance drop of no more than 10% per year of light from the current value (DXI and DXW series up to 5%). The modules are provided with a foam adhesive tape on the underside to facilitate fastening in position before final mechanical locking. Degree of protection IP65 / IP68. High resistance to shocks, shocks and other external influences.
3 or 5 year warranty without limitation of hours of light!
FAQ – Frequently Asked Questions
Why choose 12V modules instead of 24V, for instance?
The main advantage is that a 12V system is an absolute standard. There is a huge selection of accessories available for it, ranging from dimmers to various power supplies. For standard light boxes and small to medium-sized signs, it is an ideal choice that is easy to install and simple to repair if needed.
How long of a chain can a single power supply feed?
With a 12V system, you must keep in mind that a slight voltage drop occurs over long runs. Generally, we recommend powering the string from both ends or splitting it after approx. 20 to 50 modules (depending on their wattage). If you wire too many in series one after another, the ones at the end will shine noticeably dimmer than those near the power supply.
What power supply (transformer) should I get for these modules?
You will need a stabilized 12V DC (direct current) power supply. Remember to leave a safety margin – if the modules consume around 80 W, get at least a 100W power supply. This ensures the transformer won't run at maximum heat, won't whine, and will last much longer.
Can I cut the module chain anywhere I want?
Yes, that's the beauty of it. The modules are wired in parallel, so you can cut them anywhere between each other using regular wire cutters. Just make sure the exposed wire ends don't touch a metal substrate or each other to avoid blowing fuses.




