LED strip digital W SMD5050/30 12V/7,2W/1m IP68
Related products
Product detailed description
New 7.2 W/m digital LED strip with IP68 protection for indoor and outdoor applications. DIGI LED strip manufactured with IP68 protection, ie. Silicone bucket filled with silicone gel. Their high resistance to external influences predisposes them to versatile use. The digital LED stripe features a balanced brightness and innovative design.
This series is developed on the basis of years of experience with the need of customers and is equipped with quality conductors and 2x2oz (2 ounces) of copper on the FPC - the LED strip itself, which guarantees minimal resistance of the conductor and high quality heat from SMD LED to the substrate.
The LED strip is equipped with a special 3M VHB adhesive tape for silicones and low-polar surfaces. The LED strip should always be installed on a degreased aluminum mat for proper heat transfer to the substrate.
For reliable operation and long service life, it is also necessary to provide sufficient air circulation to cool the chips. Overheating at extreme temperatures, especially on sunny days in closed systems, reduces service life.
Characteristics:
- Use for light lines, advertising boxes, 3D letters
- Low consumption, excellent heat dissipation (<50 ° C)
- Resistant to UV radiation
- Can be controlled by small IR (RF) drivers up to 5m length or DMX-SPI transmitters up to 50m
- Optimized for depths from 35mm
- Professional 3M VHB tape for easy installation
- Splitable scissors for each module (3 LEDs), divisibility 10cm
- Certified for UL, TUV-CE, RoHS
| Parameters | |
| Color | digi RGB |
| Voltage | 12 V |
| Power consumption / 1 m | 7,2 W |
| IC type | WS2811s |
| SMD type | RGB 5050 |
| Temperature | N/A |
| Luminosity | Variable by color |
| Protection | IP 68 |
| Copper thickness on PCB | 2 oz |
| Angle of light 2θ1/2 | 120° |
| Width | 12 mm |
| Package | 5 m |
Comment:
- 2θ1/2 is the half total value (effective value)
- Luminosity is measured with a tolerance of ± 10%
- CRI is tested with a tolerance of -1
- The voltage is tested with an acceptable tolerance ± 1V
- The temperature of the CCT LED strip is shown after being embedded in silicone
- The luminous flux is indicated on the 1 meter length of the LED strip
- The width tolerance is ± 0.2mm
- The tolerance of the length is 0.2%
- IC type 2811s = programmable segment are 3LED
Be the first who will post an article to this item!
-1.jpg?62824e46){kind=logo}
