Al strip for LED 90/60° corner 2m

Product detailed description

Al profile for LED strips up to 10 mm width. This bar is primarily designed to illuminate the work area of ​​the kitchen, but can also be used as a line lighting for corridors and other rooms.

The material and shape of the bar is designed to perfectly drain the heat from the more efficient led strips while optimally illuminating the worktop.

Please note the bar is without a cap, here you can order below.

The profile has a total length of 2 m, can be formatted to the required lengths with an accuracy of 0.5 cm.

We bill bills over a meter. In the case of formatting, it is necessary to calculate the cut of the blade about 4 mm.

Advantages:

• The 60° angle bar does not dangle when mounted above the worktop!
• Possibility to use linear lenses
• Choice of transparent or opal cover
• Mounting bracket on which the bar can be easily tilted.
• Quality end caps for professional endings
• Lower height = light is not absorbed by the profile
• Double wall = better cooling
• Unbeatable price

We recommend that you purchase:

• Finely matte cover (reduces the luminous intensity by only about 15% and fairly scattered light) - is not part of the bar (shown on the photo)
• Mounting brackets that will greatly facilitate installation, for example under the kitchen unit.

Parameters:

• Width 20 mm, height 4.5 to 16 mm, length 2000 mm, internal width 10.2 mm
• Wall thickness 1 mm
• Shelf temperature 60 cm with chip 5050 WW after 1 hour: 34.9 ° C